Loading ...
Loading ...
Loading ...
4
SAFETY INFORMATION
The LP gas cylinder used with this appliance must be:
(a) Constructed and marked in accordance with the Specificaons for
LP-Gas Cylinders of the U.S. Department of Transportaon (D.O.T.)
or the Naonal Standard of Canada, CAN/CSA-B339, Cylinders,
Spheres and Tubes for Transportaon of Dangerous Goods; and
Commission, as applicable; and
(b) Provided with a listed overfilling prevenon device.
(c) Provided with a cylinder connecon device compable with the connector
for outdoor cooking appliances.
The LP cylinder used must include a collar to protect the cylinder valve.
DO NOT store a spare LP-gas cylinder under or near this appliance.
An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
Never fill the cylinder beyond 80 percent full.
Inspect the hoses before each use for excessive abrasion or wear, or cuts that may affect safe operaon of the griddle. If there
is evidence of excessive abrasion or wear, or the hose is cut, it must be replaced prior to the griddle being put into operaon.
The replacement hose assembly must be those specified by the manufacturer.
Never use charcoal, lighter fluid, lava rocks, gasoline, kerosene, or alcohol with this product.
Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
If griddle is not in use, the gas must be turned off at the supply tank.
DO NOT completely cover the top surface in foil as this can lead to excessive heat and the potenal for a possible fire.
Doing so will void your warranty.
Never use the griddle without the drip cup installed and hung under the grease pan. Without the drip cup, hot grease and
debris could leak downward and produce a fire hazard.
Never operate this griddle without the hose ring secured to the leg. This can keep the regulator hose away from hot surfaces
and dripping hot grease. Failure to do this may cause a fire or explosion.
Always use a meat thermometer to ensure food is cooked to a safe temperature.
Please use protecve gloves when assembling this product.
DO NOT force parts together as this can result in personal injury or damage to the product.
This griddle should be thoroughly cleaned and inspected on a regular basis. Clean and inspect the hose before each use of the
appliance. If there is evidence of abrasion, wear, cuts, or leaks, the hose must be replaced prior to the appliance being put
into operaon.
Keep the venlaon openings of the tank enclosure free and clear from debris.
Your griddle has been checked at all factory connecons for leaks. Recheck all connecons, as movement in shipping can
loosen connecons.
Check for leaks even if your unit was assembled for you by someone else.
DO NOT operate if gas leak is present. Gas leaks may cause a fire or explosion.
Deaths, serious injury or damage to property may occur if the above is not followed exactly.
Loading ...
Loading ...
Loading ...