Loading ...
Loading ...
Loading ...
88
S Selecting the AF AreaN
Select the AF area selection
mode.
Press the <S> button. (9)
Look through the viewfinder and
press the <B> button.
X Press the <B> button to change
the AF area selection mode.
By default, the button changes the
mode to single-point AF, Zone AF,
and 19-point AF.
1
Press the <S> button. (9)
X The 19 AF points will be displayed in
the viewfinder.
If Zone AF has been set, the selected
zone will also be displayed.
2
Select the AF point.
The AF point selection will change in
the direction you tilt the <9>. If you
press <9> straight down, the center
AF point (or zone) will be selected.
You can also use the <6> and
<5> dials to select the AF point. The
<6> dial selects an AF point in the
horizontal direction, and the <5>
dial selects an AF point in the vertical
direction.
Selecting the AF Area Selection Mode
Selecting the AF Point Manually
With [8C.Fn III -7: Manual AF pt. selec. pattern], you can set either [0:
Stops at AF area edges] or [1: Continuous] (p.212).
COPY
Loading ...
Loading ...
Loading ...