Loading ...
Loading ...
Loading ...
28 29
PAGE HEADER..... PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
Press EXIT button. Machine will beep once to
confirm setting.
CLEAN CYCLE
Press MENU button until CLEAN CYCLE icon
flashes and PUSH is displayed on the
LCD screen.
To start the CLEAN CYCLE press the
illuminated MANUAL button.
The CLEAN CYCLE icon will flash and the
machine will start to countdown from 370
seconds.
The machine will return to STANDBY when
the cleaning cycle has ended.
Refer to cleaning instructions on page 36 for
instructions.
ADVANCED MENU
Press & Hold - 1 CUP
Press & hold 1 CUP to bypass the pre-infusion
phase and deliver water to the group head at
the full 9 bar pressure. Release button to stop
extraction. This function can be used when
purging the group head.
Press & Hold - 2 CUP
Press & hold 2 CUP to bypass the pre-infusion
phase and deliver water to the group head at
the full 9 bar pressure. Release button to stop
extraction. This function can be used when
purging the group head.
Press & Hold - MANUAL
Press & hold the MANUAL button to deliver
water to the group head at low pre-infusion
pressure. When MANUAL button is released,
water will continue at the full 9 Bars of
pressure. Press MANUAL button again to
stop extraction . This function can be used to
manually control the pre-infusion duration.
OPERATING YOUR BREVILLE PRODUCT
ACCESS ADVANCED MENU
To access the Advanced Menu:
With machine OFF, press and hold the
1 CUP button, then press the POWER
button at the same time.
POWER
POWER
TURN
POWER OFF
THEN PRESS
& HOLD
Resetting default settings
The machine has the following
default settings:
1. Temperature – 93°C
2. Pre-Infusion – Duration Pr07
3. Pre-Infusion – Power PP60
4. Steam temperature - 135°C
5. Audio - LO
6. Water Hardness - 3
7. Espresso Volume durations –
30/30 secs
To reset machine to original default settings,
first enter Advanced Menu. rSET will be
displayed on the LCD. Press the MENU button
to reset the machine to the default settings.
The machine will beep 3 times to confirm.
The machine will then prompt you to set the
water hardness. Select your water hardness
using the UP & DOWN arrows & press
MENU to confirm or press EXIT to return to
STANDBY mode.
Temperature Unit - ˚C/˚F (SEt)
Temperature Unit will be displayed on the LCD
screen as SEt. Press MENU to Select.
Use UP and DOWN arrows to select desired
temperature unit. Press MENU to set.
Machine will beep once to confirm selection.
Press EXIT to return to STANDBY mode.
Loading ...
Loading ...
Loading ...