Loading ...
Loading ...
Loading ...
24 25
PAGE HEADER..... PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
The machine will stop after 2 CUP volume has
been extracted and will return to STANDBY
mode.
MANUAL
The MANUAL button allows you to control
the espresso pour volume to suit your
preference.
Press MANUAL button once to start the
espresso extraction. The extraction will
start using the low pressure pre-infusion.
Press MANUAL button again to stop
extraction.
NOTE
To stop an extraction at any time, press
the 1 CUP, 2 CUP or MANUAL button
and the machine will return to
STANDBY mode.
STEAM
For instant steam, move STEAM LEVER to
OPEN position. The Steam LED will be On.
To turn STEAM off, move STEAM LEVER to
CLOSED position. The machine will return to
STANDBY mode.
CAUTION: BURN HAZARD
Pressurised steam can still be released,
even after machine has been switched off.
Children must always be supervised.
HOT WATER
For instant hot water, rotate the HOT WATER
dial to OPEN position. The Hot Water LED
will be On.
To turn HOT WATER off, rotate the HOT
WATER dial to CLOSED position. The
machine will return to STANDBY mode.
NOTE
You cannot run hot water and extract
espresso at the same time.
OPERATING YOUR BREVILLE PRODUCT
LCD PROGRAMMING FUNCTIONS
To program the machine, press MENU button
once. The LCD will display all programming
functions. Continue to press MENU button to
select your desired function.
At any stage during programming, press EXIT
to return to STANDBY mode.
NOTE
The MENU button is disabled when
the machine is extracting espresso or
delivering hot water.
SHOT DURATION
1 CUP Duration Programming
Press MENU button until SHOT VOL icon
flashes and 1 CUP is displayed on the LCD
screen.
Press 1 CUP button to start water flow from the
group head.
Press 1 CUP again once required extraction
duration has been reached.
The machine will beep twice to indicate the
new 1 CUP duration has been set.
2 CUP Duration Programming
Press MENU button until SHOT VOL icon
flashes and 2 CUP is displayed on the LCD
screen.
Press 2 CUP button to start water flow from the
group head.
Press 2 CUP again once required extraction
duration has been reached.
The machine will beep twice to indicate the
new 2 CUP duration has been set.
NOTE
1 & 2 cup volumes use duration to
control espresso volume as default
setting. Access the Advanced Menu
(page 28) if you wish to use Volumetric
controls for these volumes.
Loading ...
Loading ...
Loading ...