Loading ...
Loading ...
Loading ...
Assembly is complete!
Please take the following steps before using the gym:
1. Make certain all bolts are tightened securely.
2. Make certain all Cable Bolt Jam Nuts are properly Secured.
3. Make certain all cables are seated into all pulley grooves and pulley retainers properly aligned.
A cable rubbing against steel will damage the nylon coating, voiding warranty and resulting in
a need for replacement.
4. Pre-stretch the cables. The cables may require an additional adjustment after the first few
workouts. To speed up this process you can put the Weight Selector Pin in the bottom hole on
the weight stack. Carefully pull on the cables with great force, providing any initial cable stretch.
5. The cables should be adjusted as tight as possible, but no so tight as to lift the Top Plate above
the weight stack. Be certain to secure the jam nuts after adjustments are made.
6. For better performance, apply a household lubricant (such as silicone) to any adjustable areas
and to the Guide Rods.
MAINTENANCE:
1. Inspect cables for bulging fraying and damage prior to each workout.
2. Inspect all accessory attachments for wear prior to each workout.
3. Inspect all bolts and welds weekly.
4. Inspect pulleys for visible damage and wear weekly.
5. Clean and apply silicone to the Guide Rods every 6 months.
Enjoy many years of a Fit Lifestyle.
Thank you for purchasing the BodyCraft GL/GLX Strength Training
System. If you have any questions, please call your local BodyCraft
dealer, call our customer service department at 800-990-5556 or at
www.bodycraft.com.