Loading ...
Loading ...
Loading ...
10
STEP 4 ASSEMBLE WEIGHT STACK
91
77
32
31
5
20
20
67
67
30
89
94
89
2
33
2. APPLY SILICONE to the GUIDE RODS
(5), then CAREFULLY slide a total of 14
WEIGHT PLATES (33) (NOTE: 19
WEIGHT PLATES if you have the optional
50lb add-on kit) one at a time onto the
GUIDE RODS (5) making sure to orient
the selector holes toward the front and
bottom. Attach the SELCTOR ROD (31) to
the TOP PLATE (32) using TOP PLATE
BOLT (91) and Tighten. Slide top plate
assembly onto the weight stack.
1. Insert two 1" ID PLASTIC GUIDE ROD HOLDERS (62) into the holes on the BASE
FRAME (1). Insert the GUIDE RODS (5) into the 1" ID PLASTIC GUIDE ROD HOLDERS
(62). See Note below before proceeding! Slide the LONGER STACK SPACERS (19) onto
the GUIDE RODS (5), followed by the RUBBER CUSHIONS (67).
NOTE: If you have purchased the 50lb Add-on Weight
Plate kit use the Shorter Stack Spacers (20) in
place of the Longer Stack Spacers (19).
CAUTION. Be CAREFULL NOT
to pinch fingers when lowering
the weight plates in the next step.
3. Attach the GUIDE
ROD MOUNT (30)
onto the GUIDE
RODS (5), then
attach to TOP
FRAME (2) using
two 5/16" X 5/8"
BUTTON HEAD
BOLTS (89) as
shown. Tighten
5/16" X 1/4" SET
SCREWS (94) into
the GUIDE RODS
(5).
Loading ...
Loading ...
Loading ...