Loading ...
Loading ...
Loading ...
23User manual
ENGLISH
5.5 Use Voice Command
Voice Command allows to add keywords to
dictation files by speaking them.
D Note
The Voice Command feature must be enabled
with Philips SpeechExec or the software
application of your system integrator and the
proper configuration (keywords, codes to use)
and settings must have been transferred to the
Digital Pocket Memo. See Advanced configuration
on page 19 for more information.
Voice command training5.5.1
The voice recognition engine of the Digital
Pocket Memo must be trained to recognize your
voice and way of speaking. You can quickly train
the Digital Pocket Memo to recognize individual
numbers and letters of the alphabet, as well as
keywords. The training process takes only a few
minutes.
Follow these steps to train the Digital Pocket
Memo:
Press the 1
MENU button
1
while in the stop
position to open the menu.
Press the 2 + or – button
2
to select the
Setup menu item and press the
ENTER smart
button
3
.
Press the 3 + or – button
2
to select the
Voice cmd traing menu item and press the
ENTER smart button
3
.
D Note
The voice command setting must be acti-
vated in Philips SpeechExec or the software
application of your system integrator for this
option to appear in the menu.
The first keyword is displayed. Press and 4
hold the
VOICE smart button
4
and say the
keyword. Release the
VOICE smart button
when the status LED
5
glows in green.
Press the + button to skip training the
current item and continue to the next.
The Digital Pocket Memo will prompt you 5
to repeat the word. Press and hold the
VOICE smart button
4
and say the keyword
again. Release the
VOICE smart button when
the status LED
5
glows in green (training
was successful) or red (training was not
successful). If the training was successful,
the Digital Pocket Memo will automatically
advance to the next keyword. Repeat from
step 4 until you have trained all keywords.
Delete dictation
Insert mode
Keywords
Setup
Language
BACK ENTER
USB chick charge
Delete dictations
Format memory
Voice cmd traing
BACK ENTER
4
3
1
2
A B C
5
D Note
If you have configured Voice Command to use
alphanumeric characters, the training procedure
starts with with numbers (0-9), followed by
letters (A-Z), then special characters. For
recognition of letters, say the word for each
letter, such as “alpha” for A, “bravo” for B and
so on.
Loading ...
Loading ...
Loading ...