Loading ...
Loading ...
Loading ...
5
• Connect your tweeters to channels 1+2.
Set 1+2 switch to HP.
Adjust 1+2 HP frequency to the tweeter manufactures recommendation. 3500 Hz is a good starting point.
• Connect your woofers to channels 3+4.
Set channel 3+4 switch to LP/BP.
Set channel 3+4 switch to BP.
Adjust the 3+4 LP frequency to the manufactures recommendation. 3500 Hz is a good starting point.
Adjust 3+4 HP frequency to 50 Hz.
• If you have two subwoofers connect one to channel 5 and one to channel 6.
• If you have one subwoofer connect it to channel 5+ and channel 6-.
• Set channel 5+6 switch to LP/BP.
Set channel 5+6 MODE switch to SUB.
Plug in the remote sub control.
Adjust the 5+6 LP frequency to 50 Hz.
For a sealed box adjust the 5+6 HP frequency to 10 Hz.
For a vented box adjust the 5+6 HP frequency 5 Hz lower than the port tune frequency.
+–
SUBWOOFER
+–
SUBWOOFER
REMOTE SUB CONTROL
3.5K2 HP
50Hz20Hz SUB
LP/BP
50Hz
C4
RADIO
LP/BP3.5KBP
WOOFER
WOOFER
TWEETER
TWEETER
C4 <GRAPHIC of Source Radio to input channel 1+2 of amplifier. Tweeter on channels 1+2. Woofer on channels 3+4. one
subwoofer wired to channel 5, one subwoofer wired to channel 6>
Loading ...
Loading ...
Loading ...