Loading ...
Loading ...
Loading ...
4
5 CHANNEL WITH BRIDGED SUBWOOFER
• (SEE GRAPHIC C3)
• If you have two input wires from the source deck plug them into inputs 1+2.
Set INPUT switch to 2.
• If you have four input wires from the source deck plug them into inputs 1+2 and 3+4.
Set INPUT switch to 4.
• If you have five input wires from the source deck plug them into inputs 1+2 and 3+4. The subwoofer plugs into
channel 5. Set channel 5+6 MODE switch to SUB.
Set INPUT switch to 6.
• If you have six input wires from the source deck plug them into inputs 1+2, 3+4, 5+6.
Set INPUT switch to 6.
• Put your woofer/tweeters on channel 1+2, 3+4.
Set 1+2, 3+4 switch to HP.
Adjust 1+2, 3+4 HP frequency to 50 Hz.
• One subwoofer bridged mono is wired to channel 5+ and channel 6-.
Set channel 5+6 switch to LP/BP.
Set channel 5+6 MODE switch to SUB.
Plug in the remote sub control.
Adjust the 5+6 LP frequency to 50 Hz.
For a sealed box adjust the 5+6 HP frequency to 10 Hz.
For a vented box adjust the 5+6 HP frequency 5 Hz lower than the port tune frequency.
REMOTE SUB CONTROL
+–
SUBWOOFER
50Hz6 HP
50Hz20Hz SUB
LP/BP
50Hz HP
C3
RADIO
XOVER
XOVER
XOVER XOVER
C3 <GRAPHIC of Source Radio to input channel 1+2, 3+4, 5 of amplifier. Woofer/Tweeter/Xover on channels 1+2, 3+4, one
subwoofer wired to channel 5+ and channel 6->
TRIAMP A SUBWOOFER, WOOFER, AND TWEETER:
• (SEE GRAPHIC C4)
• Connect the source deck front channel wires into inputs 1+2.
Set INPUTS switch to 1+2.
Loading ...
Loading ...
Loading ...