Loading ...
Loading ...
3
Set INPUT switch to 6.
• If you are NOT using a subwoofer set all switches to flat. If you hear distortion in your woofers set all switch to
HP and adjust all HP frequency until the distortion goes away. This will probably be around 50 Hz to 70 Hz.
50Hz6 FLAT or HP
50Hz
FLAT or HP
50Hz FLAT or HP
C1
RADIO
XOVER
XOVER
XOVERXOVER
XOVER XOVER
<GRAPHIC of Source Radio to input channel 1+2, 3+4, 5+6 of amplifier. Woofer/Tweeter/Xover on channels 1+2, 3+4, 5+6>
• If you are using two subwoofers: (SEE GRAPHIC C2)
Put your woofer/tweeters on channel 1+2, 3+4.
Set 1+2, 3+4 switch to HP.
Adjust 1+2, 3+4 HP frequency to 50 Hz.
• Subwoofers on channel 5+6.
Set channel 5+6 switch to LP/BP.
Set channel 5+6 MODE switch to SUB.
Plug in the remote sub control.
Adjust the 5+6 LP frequency to 50 Hz.
For a sealed box adjust the 5+6 HP frequency to 10 Hz.
For a vented box adjust the 5+6 HP frequency 5 Hz lower than the port tune frequency.
REMOTE SUB CONTROL
+–
SUBWOOFER
+–
SUBWOOFER
50Hz6 HP
50Hz20Hz SUB
LP/BP
50Hz HP
C2
RADIO
XOVER
XOVER
XOVER XOVER
C2 <GRAPHIC of Source Radio to input channel 1+2, 3+4, 5 of amplifier. Woofer/Tweeter/Xover on channels 1+2, 3+4, one
subwoofer wired to channel 5 one subwoofer wired to channel 6>
Loading ...
Loading ...
Loading ...