Loading ...
Loading ...
Loading ...
10 11
CLEANING YOUR HUMIDIFIER (CONTINUED) CLEANING YOUR HUMIDIFIER (CONTINUED)
End of Season Cleaning and Storage
Follow the cleaning instructions when the humidifier will not be used for at least one week,
or at the end of the season.
At the end of the season, remove any accessories and discard. Allow the humidifier and
all components to dry completely before storing.
DO NOT store humidifier with water inside the Reservoir or Water Tank.
Pack unit safely and store in cool, dry location.
Disinfecting
Follow steps 1-5 in Before Cleaning section, then follow the additional steps below.
Note: Bleach may stain clothes. It is recommended that you wear rubber gloves during this
process to protect your hands.
Step 2
Step 1
Step 3 Step 2
Step 1
1. Place Mist Chamber over Air Outlet.
2. Place Outlet Cover on top of Mist Chamber and lightly press down until it clicks into place
and sits fully seated on the Housing.
3. Place Mist Outlet into the recess in the Outlet Cover, lining up the opening in the Outlet
with the circle graphic on the Outlet Cover. Press down until you hear a click. This ensures
Mist Outlet is positioned properly.
4. Ensure Float Paddle is installed correctly. Line up Float Paddle with the float paddle shape
on the bottom of the Reservoir. Place Float Rod over both Brackets and press firmly
until you hear it click into both Brackets. Pull gently up on the Float Rod to be sure it
doesn’t pop out of the Brackets.
CAUTION: Improper placement of the Float Paddle could result in leaking or water
not feeding to the Reservoir.
5. Replace Tank Cover and place Tank back onto Base.
(3,8 l)
B
1 tsp
W
1 Gal.
MAX
$
MAX
MAX
1.5C
Step 5
1
“Click”
Step 4
Top
Le Haut
Step 5
$
MAX
MAX
MAX
Step 3
MINUTES
“Click”
Reassembling
After descaling and disinfecting, follow these steps to reassemble the unit:
Step 4
1. Mix 1 gallon (3.8 L) of water with 1 teaspoon of bleach. Pour the bleach solution
into the Tank.
Note: Using more than 1 teaspoon of bleach to 1 gallon (3.8L) of water may result
in damage to the humidifier.
2. Place Tank on Base. Bleach solution will drain into the Water Reservoir. If not using
a dishwasher, the Mist Outlet, Outlet Cover, Mist Chamber and Tank cover can be soaked
in the Tank. Just add additional bleach solution to cover the components in the Water Tank.
3. Soak for 20 minutes, then remove the Water Tank and slowly empty bleach solution into
sink. Remove components placed in Tank. Rinse Tank and components with tap water until
the smell of bleach is gone.
4. Remove Float Paddle from Reservoir by lifting up on Float Rod and set aside.
5. Empty bleach solution from the Reservoir by pouring from the top of the Housing on the
opposite side from the Mist Outlet and away from Power Knob. Pour 1.5 cups of water into
Reservoir, lightly swish water and pour out. Repeat until smell of bleach is gone. Avoid
getting water into any openings in the Reservoir area by pouring from the top of the Housing
on the opposite side from the Mist Outlet and away from Power Knob.
CAUTION: Do not submerge the Base in water. Doing so may damage the humidifier
and void the warranty.
Wipe outside of housing to dry any water that may have escaped between Base and Housing.
Loading ...
Loading ...
Loading ...