Loading ...
Loading ...
Loading ...
Installation
99
EN
5. Unscrew the 6 screws that hold the glass
hob top to the casing (see the figures
below for their location).
(seen from below)
65 cm
75 cm
90 cm
6. Remove the glass hob top.
Replacing the nozzles
1. Unscrew screw A and push air regulator
B as far as it will go.
2. Use a spanner to remove the nozzles C
and install the new ones for the required
gas supply, following the indications
given in the relevant table (see “Gas
types and Countries”).
The nozzle tightening torque must
be no more than 3 Nm.
Loading ...
Loading ...
Loading ...