DCS-825L User Manual

Loading ...

33D-Link DCS-825L User Manual

Section 8: Troubleshooting

Troubleshooting

2. What should I do if the image is out of focus?

You can turn the white focus ring on the front of the camera to adjust the focus.

3. How do I change the accent rings?

Rotate the accent ring counter clockwise, then lift it o. Place the new ring on and rotate it clockwise until it clicks into place.

4. How do I select a dierent lullaby?

Use the mydlink Baby app to change the lullaby. Tap on the music icon on the camera’s Live View screen. Select a lullaby from the list or select Play

All. (Refer to "mydlink Baby App Conguration" on page 24.)

5. I started the mydlink Baby app, but I can’t nd my camera.

• Make sure your camera is turned on and receiving power.

• If you are setting up a new camera, make sure your smartphone or tablet is connected to the camera’s Wi-Fi signal (not your wireless router). This

also applies when you enable Direct Connect to use the camera away from home. (Refer to "Advanced Features" on page 31.)

• The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a 4-digit code (the last 4 digits of your camera’s MAC address).

• The Wi-Fi network name and password is printed on a label on the bottom of your camera and on the back of the Quick Install Guide.

• If you still can’t nd your camera, reset your camera by pressing its reset button for 10 seconds (while it is powered on).

6. Why is there a white haze when viewing Live Video in night vision mode?

The night vision lights on the camera may be reecting o a nearby surface. Try repositioning and aiming the camera.

7. What does it mean when the Power LED is red?

When you power on the camera, the Power LED will be solid red. When you reset the camera, the Power LED will be ashing red.

Reset

1. What can I do if I forget my password?

If you forget your password, you must reset your camera. Unfortunately, this will change your settings back to the

factory default settings. To reset your camera, use an unfolded paper clip to press and hold the RESET button for

about10 seconds while your camera is powered on.

Loading ...

D-Link DCS-825L Wi-Fi Baby Camera