DCS-825L User Manual

Loading ...

Section 7: Advanced Features

31D-Link DCS-825L User Manual

Advanced Features

Enabling Direct Connect

Press and hold the (+) button on the camera for at least ve seconds. The temperature

indicator LED on the top of the camera will ash three times.

Connect your mobile device to the myBabyCam-xxxx Wi-Fi network. (XXXX is a 4-digit

code, the last 4 digits of your camera’s MAC address.) Use the Wi-Fi password you created

during the Setup Wizard installation process.

Note: Once you are connected to the camera, you will no longer have Internet access.

During the initial steps with the Setup Wizard, you congured the camera to connect to your home Wi-Fi network. If you want to take your camera

with you, it's not a problem with the DCS-825L.* You can connect directly to your camera, which means there is no need for an Internet connection

or a router. Follow the steps below to enable Direct Connect.

*You have the option of using a portable USB battery pack (not included) that supplies 5V/2A of power when you take

the camera with you. Plug the USB battery pack into the Micro-USB power port. The Power LED on the bottom of the

camera will turn red when the camera is powered on.

(+)

Loading ...

D-Link DCS-825L Wi-Fi Baby Camera