Loading ...
Loading ...
Loading ...
15D-Link DCS-825L User Manual
Section 2: Installation
Mounting the Camera
1.
Place the mounting base where you want to position the camera and use a pencil to
mark the holes.
4. Place the base cover over the mounting base and screw the camera stem clockwise into
the mounting base.
2. Use a 6mm drill bit to drill two holes that are at least 30mm deep. Use a mallet to insert
the wall anchors into the holes.
3. Place the mounting base over the holes that you drilled in the wall. Use the supplied
screws to attach the mounting base to the surface of the wall.
Note: Do not overtighten the screws as this may damage the mounting base.
Refer to the steps below for mounting the camera. The DCS-825L is for indoor use only. We suggest you conīgure the camera before mounting it.
1
2
3
WARNING - STRANGULATION HAZARD
Children have STRANGLED in cords. Keep adapter cord out of reach of children (minimum of three feet away). NEVER place the camera or adapter cord inside
the crib or child's sleeping area. Do not use extension cords. This product is NOT intended to replace proper adult supervision of children.
4
Loading ...
Loading ...
Loading ...