Loading ...
Loading ...
3
General Information
Caution: To prevent possible damage to the turntable
platter bearing, do not transport the MT2 Preci-
sion Turntable with the platter installed.
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected
to the MT2 Precision Turntable.
2. The MT2 Precision Turntable comes with the
Sumiko BP2 High Output Moving Coil Cartridge.
3. It is recommended the Professionals at your Mc-
Intosh Dealer, who are skilled in all aspects of
Turntables and Phono Cartridges, install the MT2
Precision Turntable and any associated audio equip-
ment.
4. For optimum performance, the setup and adjust-
ment of the MT2 Precision Turntable requires
special test recordings and test/measurement equip-
ment. Contact your McIntosh Dealer for additional
information and assistance.
5. The MT2 Precision Turntable is supplied with the
Sumiko Blue Point 2 High Output Moving Coil
Cartridge. The Sumiko Blue Point 2 output level is
compatible with the MM (Moving Magnet) Input
on most McIntosh Preamplifiers, Integrated Am-
plifiers and A/V Control Center. It is designed to
playback 33-1/3 rpm and 45 rpm vinyl recordings.
Contact your McIntosh Dealer for additional infor-
mation and assistance.
6. When discarding the unit, comply with
local rules or regulations. Batteries should
never be thrown away or incinerated but
disposed of in accordance with the local
regulations concerning battery disposal.
7. For additional information on the MT2 and other
McIntosh Products please visit the McIntosh Web
Site at www.mcintoshlabs.com.
Tonearm Headshell Wiring
Refer to the following list of wire colors in the head-
shell for installing the cartridge into the Headshell:
Cartridge Connections Headshell Wire Color
Left Channel (+) White
Left Channel (-) Blue
Right Channel (+) Red
Right Channel (-) Green
Sumiko BP2 Cartridge Connections
Refer to the following illustration when connecting the
McIntosh Cartridge in the Headshell:
Phono Cartridge Connection Information
RL
E
L
E
R
Right Channel (-)
Right Channel (+)
Left Channel (-)
Left Channel (+)
Rear View of Sumiko BP2 Cartridge
General Information and Cable Information
8. When an AC Line Cord is used to connect the
supplied AC / DC Adapter to an AC Outlet, it is im-
portant the line cord conductor size is a minimum
0.75mm
2
for each leg of the two conductor cord.
9. If it should become necessary to replace the sup-
plied AC / DC Adapter and/or the plug adapters,
order part number 320508SP from the McIntosh
Parts Department. Refer to the illustration below.
Loading ...
Loading ...
Loading ...