Loading ...
Loading ...
Loading ...
19
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as
shown below. It is very important the four feet are still
attached to the bottom of the equipment. This will en-
sure the proper equipment location on the Platter foam
pads. Failure to do this will result in shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If a
shipping carton or any of the interior part(s) are need-
ed, please call or write Customer Service Department
of McIntosh Laboratory. Refer to page 2. Please refer
to the Part List below for the correct part numbers.
Quantity Part Number Description
1 310599SP Top Foam Packing
1 310598SP Foam Packing for Top
of the Dust Cover
1 310596SP Foam Packing for Bottom
of the Dust Cover
1 310597SP Foam Packing for Top
of the Turntable
1 310595SP Foam Packing for
Accessories and Outer
Platter Set
1 310594SP Shipping carton only
Top Foam
Packing
Record Mat
and Cartridge
Alignment Gauge
Dust Cover
Turntable
Foam Packing
for Top of the
Turntable
Shipping Carton
Air Bubble
Packing
Outer Platter
Foam Packing
for Top of the
Dust Cover
Foam Packing
for Bottom of the
Dust Cover
Foam Packing
for Accessories
and Outer Platter Set
Loading ...