Loading ...
Loading ...
Loading ...
39
TROUBLE SHOOTING GUIDE
Symptom Possible Causes Solution
Damage to the inside
of the dishwasher
Wrong arrangement of dishes may
prevent rotation of the spray arms
and cause damage.
Correctly arrange the dishes.
Buzzing sound.
(High Temperature
Alarm)
((BEEP))
The warning sound alerts if the
inside of the dishwasher increases
higher than specified temperature.
(50℃~55℃)
open the door to allow the
water to cool.
No power-on or
automatic turn-off
Or, power-on but no
operation
• Is the Plug properly inserted into
the socket?
• Is any extension cord (power
board) used?
• Is the circuit breaker off?
• Is there a home power failure?
• Connect the power plug.
• Use an extension suitable
for the product standards.
• Reset the circuit breaker.
• Check other appliances for
power.
If using an extension cord (power
board) the dishwasher may
automatically turn off despite
power-on due to insufficient current
capacity of the extension device
during operation.
• Use an extension suitable
for the product standards.
• Is the dishwasher door closed?
• Is it on timer delay start.
• Close the dishwasher door.
• Cancel the timer setting,
or allow it to start as it was
set to.
Water leaks outside
the dishwasher.
The door may not be closed due to
a titled dishwasher. In this case a
water leak may occur.
Wrong installation of drainage hose
may cause water leak.
If the power is off, a water leak may
be caused by a poor connection to
the tap.
• Re-install the dishwasher
and adjust the front feet.
• Check the connecting part
of drainage hose.
• Check the connection
water supply hose.
Loading ...
Loading ...
Loading ...