Loading ...
Loading ...
Loading ...
Servicing Your Honda 99
Wheels
Installation
1.Reverse the removal procedure. Install the
side collar into the wheel. Make sure the lug
(7)
on the swingarm
is located in the slot (8)
in the brake panel (9). Check that the chain
adjusters are installed properly.
2.Adjust the drive chain (page 108).
3.Tighten the rear axle nut to the specified
torque:
80 lbf∙ft (108 N∙m, 11.0 kgf∙m)
4.Adjust the rear brake (page 91).
5.Apply the rear brake, release it, then spin the
wheel and check that it rotates freely. Repeat
this procedure several times.
If a torque wrench was not used to install the
wheel, see your dealer as soon as possible to
verify proper assembly. Improper assembly
may lead to loss of braking capacity.
RIGHT REAR
(8)
(7) lug
(8) slot
(9) brake panel
(9)
(7)
Loading ...
Loading ...
Loading ...