Loading ...
Loading ...
Loading ...
98 Servicing Your Honda
Wheels
Removal
1.Raise the rear wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the front of the
motorcycle with tie-down straps.
2.Remove the rear brake adjusting nut (1),
disconnect the brake rod (2) from the brake
arm (3) by pushing down on the rear brake
pedal.
3.Loosen the rear axle nut (4) while holding
the rear axle shaft (5).
4.Turn both chain adjusters (6) so the rear
wheel can be moved all the way forward for
maximum drive chain slack.
5.Unscrew the rear axle nut. Pull the rear axle
shaft out. Push the wheel forward and derail
the drive chain from the rear sprocket.
Remove the wheel and side collar.
Take care to prevent getting grease, oil, or
dirt on the brake shoe surfaces. This can
cause poor brake performance or rapid brake
shoe wear after reassembly.
Rear Wheel Removal
RIGHT REAR
(6)
(1) rear brake adjusting nut
(2) brake rod
(3) brake arm
(4)
(6)
(3)
(1)
(2) (5)
LEFT REAR
(4) rear axle nut
(5) rear axle shaft
(6) chain adjusters
Loading ...
Loading ...
Loading ...