Loading ...
Loading ...
Loading ...
(415,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
2. Sit in the driver’s seat and face forward
for a few moments.
3. When user recognition is completed,
the Hello screen appears on the center
information display.
At this time, the seat position, outside
mirror angle, air conditioner settings,
combination meter display (color LCD)
basic screen, center information display
basic screen, and customization settings
all change based on the user information.
NOTE
. When a center information display
operation switch is pressed, the user
recognition screen is canceled, how-
ever user recognition continues.
. When the select lever is not in the
“P” position, the seat position will not
change even when user recognition is
completed.
. If user recognition fails, perform
recognition again following the instruc-
tions, refer to “When a user is not
recognized” FP413.
. User recognition is not performed
while driving.
. If the seat position or outside mirror
angle are in motion at the time when
user recognition is completed, then it is
not possible to retrieve the seat posi-
tion, outside mirror angle, or reverse
tilt-down outside mirror angle.
. If any of the following operations is
performed while retrieving of the seat
position or outside mirror angle, re-
trieving of the seat position and outside
mirror angle is canceled.
– The power seat adjustment
switch was operated.
– The outside mirror adjustment
switch was operated.
– The “SET” button was pressed.
– The “1” or “2” button was
pressed.
– The select lever was moved to a
position other than “P” position.
! When a user is not recognized
s07bp0402
In the following case, user recognition may
not be possible and “User recognition
stopped” may be displayed.
. There is an object blocking the camera.
Remove the obstacle and follow the
reference procedure to perform user re-
cognition again.
Refer to “Driver Monitoring System”
FP227.
1) Camera
NOTE
. User recognition may not be possi-
ble when there is dirt or fingerprints on
the user recognition camera. To clean,
either wipe using a soft cloth or else
wipe gently using a moistened cloth
– CONTINUED –
Driver Monitoring System
413
7
Starting and Operating
Loading ...
Loading ...
Loading ...