Loading ...
Loading ...
Loading ...
(275,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
NOTE
If the seat is moved forward or back-
ward 1.18 in (30 mm) or more, the
reverse tilt-down will move to the
factory default position or the last
position hold.
Hold last position function:
The angle of the reverse tilt-down mirror
can be set to the latest adjusted angle.
The hold last position function operates
when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward
1.18 in (30 mm) or more.
NOTE
. The factory setting (default setting)
for this function is set as “non-opera-
tional”. This setting can be changed to
“operational” at SUBARU dealers. For
more details, contact a SUBARU dealer.
. If the hold last position function
setting is “non-operation”, the reverse
tilt-down will move to the factory de-
fault position.
! Power folding mirror switch (if
equipped)
s03ap0304
The power folding mirror switch operates
when the ignition switch is in the “ON” or
“ACC” position.
To fold the outside mirrors, press the
power folding mirror switch. To unfold the
mirrors, press the switch again.
NOTE
. If the outside mirrors have been
operated (folded or unfolded) manually,
when you turn the ignition switch from
the “LOCK”/“OFF” position to the
“ACC” or “ON” position, the outside
mirrors may be adjusted automatically
depending on the status of the power
folding mirror switch.
. If the outside mirrors have been
manually folded slightly forward of the
regularly unfolded position, when you
turn the ignition switch from the
“LOCK”/“OFF” position to the “ACC”
or “ON” position, the outside mirrors
may automatically fold further forward
depending on the status of the power
folding mirror switch. When this hap-
pens, press the power folding mirror
switch. By doing so, the outside mir-
rors which have been folded to the
furthest forward position will extend to
the regularly unfolded position and
then fold rearward in the usual way. In
order to unfold the outside mirrors,
press the switch again.
. When you fold the outside mirrors
manually, the mirrors may not unfold
when the switch is pressed, even
though the motor operating sound is
heard. When this happens, operate the
power folding mirror switch again.
. When you unfold the outside mirrors
manually, the mirrors may become
wobbly. Be sure to unfold the mirrors
by operating the switch. If the outside
mirrors are still wobbly, fold the mirrors
again and then unfold them by operat-
ing the switch again.
. When the temperature is low, the
outside mirrors may stop during opera-
tion. Push the switch again. When the
– CONTINUED –
Mirrors
273
3
Instruments and Controls
Loading ...
Loading ...
Loading ...