Loading ...
Loading ...
Loading ...
(127,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
! Registration for a PIN code
s02ap2102
Steps Operation Time from the previous step
1 Turn off the ignition switch. —
2 Close all doors (including trunk/rear gate). —
3
Press and hold the “
” button on the access key fob, then press and hold the
trunk opener button (Legacy)/rear lock button (Outback) until a chirp sounds
intermittently.
—
4 Press the “
” button on the access key fob. Within 30 seconds
Input the PIN code using the trunk opener button (Legacy)/rear lock button
(Outback) within 30 seconds after the chirp sound of step 4.
For example, to register “32468” as the PIN code, perform the following
procedure.
Within 30 seconds
5
(1) Press the button three times.
(2) After a chirp sounds once, press the button twice.
(3) After a chirp sounds once, press the button four times.
(4) After a chirp sounds once, press the button six times.
(5) After a chirp sounds once, press the button eight times.
6
Perform step 5 again within approximately 30 seconds after the chirp starts
sounding intermittently.
—
7 All doors will be unlocked and locked. Then the PIN code will be registered.
—
NOTE
Press the “ ” button within 30 seconds of step 6 to end the preparation mode and move on to the registration stage. Unless the
“
” button is pressed within 30 seconds after step 6, the PIN code registration will be canceled.
– CONTINUED –
Keyless Access with Push-Button Start System
125
2
Keys and Doors
Loading ...
Loading ...
Loading ...