DIR-842 User Manual

Loading ...

56D-Link DIR-842 User Manual

Section 4 - Conguration

IPv4/IPv6 Rules

Enter a name for the rule.

Enter the source IP address range that the rule will apply to, and using

the drop-down menu, specify whether it is a WAN or LAN IP address.

Enter the destination IP address range that the rule will apply to, and

using the drop-down menu, specify whether it is a WAN or LAN IP

address.

Select the protocol of the trac to allow or deny (Any, TCP, or UDP)

and then enter the range of ports that the rule will apply to.

Use the drop-down menu to select the time schedule that the rule

will be enabled on. The schedule may be set to Always Enable, or

you can create your own schedules in the Schedules section (refer

to Schedule on page 65).

Click Apply when you are done.

The IPv4/IPv6 Rules section is an advanced option that lets you congure what kind

of trac is allowed to pass through the network. To congure the IPv4 rules, from

the Firewall Settings page click IPv4 Rules. To congure IPv6 rules, from the Firewall

Settings page click IPv6 Rules. To return to the main Firewall Settings page, click

Advanced.

To begin, use the drop-down menu to select whether you want to ALLOW or DENY

the rules you create. You can also choose to turn ltering OFF.

If you wish to remove a rule, click on its trash can icon in the Delete column. If you

wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a

new rule, click the Add Rules button

. Click Save when you are done. If you edit or

create a rule, the following options will appear:

Name:

Source IP

Address Range:

Destination IP

Address Range:

Port Range:

Schedule:

Loading ...

User Manual - Page 60