DIR-842 User Manual

Loading ...

51D-Link DIR-842 User Manual

Section 4 - Conguration

Network

Enter the IP address of the router. The default IP address is

192.168.0.1.

If you change the IP address, once you click Save, you will need

to enter the new IP address in your browser to get back into the

conguration utility.

Enter the subnet mask of the router. The default subnet mask is

255.255.255.0.

The default address to access the router’s configuration is

http://dlinkrouter.local./ Here, you can replace dlinkrouter with

a name of your choice.

Enter the domain name (optional).

Disable to transfer the DNS server information from your ISP to your

computers. If enabled, your computers will use the router as a DNS

server.

Enable or disable the DHCP server.

Enter the starting and ending IP addresses for the DHCP server’s IP

assignment.

Note: If you statically (manually) assign IP addresses to your computers

or devices, make sure the IP addresses are outside of this range or you

may have an IP conict.

LAN IP Address:

Subnet Mask:

Management

Link:

Local Domain

Name:

Enable DNS

Relay:

Status:

DHCP IP

Address Range:

This section will allow you to change the local network settings of the router and to

congure the DHCP settings. In the Settings menu on the bar on the top of the page,

click Network. Click Advanced Settings... to expand the list and see all of the options.

Loading ...

User Manual - Page 55