Loading ...
Loading ...
Loading ...
Version 02/12 - Page 9
(F in
FIGURE 12)
and locking into place. (See FIGURE 17)
WARNING
Two people must hold the canopy in place while the third person installs the screws that attach the canopy to the chimney.
4.(A in FIGURE
14) to the assembled chimney support using the four bolts
provided (E in FIGURE 14).
FIGURE 14
FIGURE 17
6.
turning the knob to the left so that the locking lever does not
(as in FIGURE 18). Insert the opposite
FIGURE 18
7. Turn the power supply on. Turn on blower and lights. If the
rangehood does not operate, check that the circuit breaker is
not tripped or the house fuse blown. If the unit still does not
operate, disconnect the power supply and check that the wiring
connections have been made properly.
!
FIGURE 16
MAKE THE INTERNAL ELECTRICAL CONNECTIONS
5. Connect the CONTROL CABLES together as indicated in
A in FIGURE 15. Insert the connected CONTROL CABLES (A
in FIGURE 15) into the black plastic CONNECTOR BOX (B in
FIGURE 15) by connecting the two black plastic pieces using
the four screws provided. (FIGURE 16 for reference also)
FIGURE 15
A
A
B
Loading ...
Loading ...
Loading ...