Loading ...
Loading ...
Loading ...
Dipswitch2 Bank
In Dipswitch2 bank, dipswitches 1 - 6 can be used to add dry
time per vend. There is always at least one minute of dry time (all
switches OFF). Setting one or more dipswitches to ON extends
the total dry time per vend by that amount of minutes. The maxi-
mum cycle length is 99 minutes. Heat and cooldown time com-
bined can never be longer than 99 minutes. Refer to Table 8 .
Dipswitch 7 specifies Cool-Down time for vended machines. The
Cool-Down time is three minutes when this switch is OFF, and
ten minutes when the switch is ON. For non-vended machines,
Cool-Down time is determined by the position of the Tempera-
ture Selector Switch.
Dipswitch 8 is used for the cycle reset on vended machines. If the
switch is OFF (default), the control will save the time left on a
cycle in case of a power failure. If the switch is ON, the control
will clear the cycle and return to Ready Mode if there is a power
failure. On non-vended machines, the control will clear any cycle
time and reset to Start Mode, regardless of the positions of these
dipswitches.
Dipswitch2 Bank
Switch OFF ON
1 No additional dry
time per vend
Plus 1 minute dry
time per vend
2 No additional dry
time per vend
Plus 2 minute dry
time per vend
Table 8 continues...
Dipswitch2 Bank
Switch OFF ON
3 No additional dry
time per vend
Plus 4 minute dry
time per vend
4 No additional dry
time per vend
Plus 8 minute dry
time per vend
5 No additional dry
time per vend
Plus 16 minute dry
time per vend
6 No additional dry
time per vend
Plus 32 minute dry
time per vend
7 Short Cool-Down
time
Long Cool-Down
time
8 Save cycle time on
long powerfail
Clear cycle time on
long powerfail
Table 8
Resetting Cycle Time to Zero
To remove any cycle time that may have accumulated on the con-
trol during setup, the cycle time on the control can be reset to
zero.
To reset the time, unplug the dryer and set dipswitch 8 to ON po-
sition. Restore power to the dryer for 10 seconds and once again
unplug dryer. Set dipswitch 8 to OFF position and restore power
to the dryer.
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
35 Part No. D516119ENR3
Loading ...
Loading ...
Loading ...