Crossover DLHF0817G User Manual - Page 10

Loading ...

Coin Meter

2:2

decimal point is turned off, and prices are set and displayed as “number of coins or tokens” required

(e.g. “12”). In either case, the value of each coin drop is stored in Register 031 “Coin Value 1” and

time a coin is deposited. The coin-value registers can be adjusted to accommodate any currency.

Free Dry / OPL Mode

When the Amount To Start (ATS) register for a program is set to 0.00 (00 in “token mode”), the

program operates in “Time per push mode” (this is free dry mode). In this mode, each time a

program button is pressed, the remaining time is incremented. The rst press adds the “Time for

Amount to Start” register value (Register 044 – 047) to the drying time, and then each additional

press continues to add the “Time per Push or Coin” (Register 048 – 051) to the drying time. These

registers are only accessible in Full Service Mode. In no case shall the displayed remaining dryer

time be greater than the “Max drying time” for that program.

Each program (temperature) button has a group of registers (040-055) assigned for setting vend

time, price, and maximum allowable time. The registers are organized to provide maximum

exibility for vended operations, yet simple programming for non-vended applications (Free dry).

Price and Time Registers

Time for Amount to Start

The time for amount to start registers Register (044 – 047) denes the time credited when the

amount to start has been paid or the base time of the drying program when Amount to start = 0.00

(00 in token mode). This time is credited when a program-selection (temperature) button is pressed

for the rst time if the remaining drying time = 0. These registers are only accessible in Full Service

Mode.

Time Per Coin (or Push In Free Dry Mode)

from a payment device or when a program button is pressed when amount to start (ATS) Register

(040 -043) = 0, AFTER the initial “Time for amount to start” has been credited, whether the

machine is idle or operating. This register is only accessible in Full Service Mode. Once these

registers are set, the control vends the same amount of time for each coin pulse received from

the payment device (or push of a program button if Amount to start = 0 for that program), up to the

Maximum drying time specied for the particular program.

DISCOUNT PRICE “PROMOTION” PROGRAMMING

The dryer can apply “Promotion” percentage discount to the vend price of a program selection at

specied times and days. Up to four different Promotion discount events and percentages can be

selected using the dryer’s built-in Real Time Clock (RTC) or one promotion event can be selected

using an optionally-installed, external signal provided by a clock-driven relay or switch. This signal

can activate multiple dryers. Both options require setup via the service registers, access to which is

described in the Service Mode section of this manual.

During machine setup, the promotional discount is represented by a three-digit percentage (%%%)

and can range from 000% (no discount) to “999” = 999%. It denes the percentage by which

Loading ...

Crossover DLHF0817G 27" Gas Dryer