Loading ...
Loading ...
Loading ...
16
Troubleshooting Guide
Problem Potential causes Solution
Hand blender does not
operate.
No power
"Check appliance is plugged in.
Check the fuse /circuit breaker in your home.
If none of the above contact Braun Service."
Mixing container is
leaking
Blade assembly not
correct in place or
worn out
Check if Blade assembly is assembled properly and not
damaged
Blade assembly is not
screwed properly to
the Mixing container
Check the position of the Blade assembly
Blending not properly,
stuck blade or speed
too low
Mixing container is
overfilled
Check maximum quantity recommendation
Big pieces of very hard
stuff blocking the
blade
"Stop blending immediately, remove motor part from
the Blade assembly and remove blockage before
proceeding"
"Follow the recommendations for the correct order of
the ingredients, hard stuff on the bottom of the bottle"
"Cut hard stuff into small pieces before blending"
Follow recommendation to first start the motor and then
turning around the appliance for blending
Blade assembly cannot
be unscrewed
Warm ingredients were
processed
Dip Mixing container in warm water
5722114444_4191-MQ5251-5252-5260-5264_INT.indd 16 30.11.20 12:25
Loading ...
Loading ...
Loading ...