Loading ...
Loading ...
Loading ...
16. TROUBLESHOOTING
Problem
1)
Possible cause Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to the mains supply.
Connect to the mains socket.
Check fuse in fuse box (domestic
installation).
The door is open. Close the door.
The On/Off button was not push-
ed.
Push the On/Off button.
The Start/Pause button was not
touched.
Touch the Start/Pause button.
The appliance is in standby mode. Push the On/Off button.
Unsatisfactory
drying result.
Incorrect program selection.
Select a suitable program.
2)
The filter is clogged.
Clean the filter.
3)
Dryness Level option was set to
Iron Dry
.
Change Dryness Level option to
higher level.
The load was too large. Do not exceed the maximum load
size.
Load size is small. Select time programme. The time
value must be related to the load.
To dry 1 item or a few wet items up
to 4 kg after a washing cycle with
well centrifuged (>1200 rpm), set a
short drying time (>40 min).
If the time is set to less than 10
min, there will be action of cool air
only (no drying).
Selected drying time for Time Dry
option was to short.
Select time programme and set
additional drying (20 - 40 min) to
improve dryness after previous
drying cycle.
The airflow slots are clogged. Clean the airflow slots at the bot-
tom of the appliance.
Dirt on the humidity sensor in the
drum.
Clean the front surface of the
drum.
Dryness level not set to desired
level.
Adjust the dryness level.
4)
The condenser is clogged.
Clean the condenser.
3)
www.aeg.com28
Loading ...
Loading ...
Loading ...