Loading ...
Loading ...
Loading ...
Protocol IEEE 802.11b/g/n two
stream radio
Max power < 20dBm
8.1 Installing and configuring
AEG Life
When connecting the tumble dryer to
the application, stand near it with Your
smart device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device.
2. Download and install App AEG Life .
3. Make sure you started a Wi-fi
connection in the dryer. If not go to
the section below.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in AEG
Life.
5. Follow the instructions on the App
for the appliance registration and
configuration.
A message appears on the appliance
display to confirm that the configuration
was successful.
8.2 Configuring the dryer
wireless connection
Have AEG Life downloaded and installed
on your smart device.
1. Tap on the Wi-Fi bar to switch the
connection on .
A pop-up message will appear, the icon
starts flashing and wireless module
begins starting up. It may take about 2
minute before it is ready.
Starting up
This might take up to 2 minutes.
Have your app ready
Wi-Fi
Cancel
When the wireless module is ready, pop-
up message will appear to inform you,
that the access point will be open for
about 3 minute.
Trying to connect to your
Access point will be open for 3
minutes.
Wi-Fi
Cancel
2. Configure the AEG Life app on your
smart device.
3. If the connectivity is configured, a
message appears on the dryer
display to confirm that the
configuration was successful.
Connected!
Signal strenght is good, 4/5
Wi-Fi
OK
4. Tap on OK to get back to the
machine settings list.
8.3 Remote Start Mode
You can start and stop a drying
programme remotely.
When the App is installed and the
wireless connection is complete, the
Remote Start Mode option will appear
among the available options.
To activate the remote start:
1. In the programme summery screen,
tap
More to enter the option list.
2. Tap on Remote Start Mode bar (ON
status).
The following message pops up:
ENGLISH
13
Loading ...
Loading ...
Loading ...