Loading ...
Loading ...
Loading ...
Dimension mm
F less than 400
LEVELLING OF THE APPLIANCE
Use small feet on the bottom of appliance to set the
appliance top surface level with other surfaces.
THE STABILITY CHAIN
CAUTION! Install the stability chain to
prevent the appliance from tilting. The
stability chain only works when the
appliance is put in a correct area.
1. Measure down 180 mm from the appliance top
surface, then measure right 30 mm.
2. Mark the position of the wall and this gives
anchor point for the stability chain.
30 mm
180 mm
OTHER TECHNICAL DATA
WARNING! These instructions are
only valid in the countries whose
symbols appear on this booklet's
cover.
Gas category: I2H
Gas supply: G20 (2H) 20 mbar
Voltage: 220-240 V
Frequency: 50 Hz
GAS BURNERS
BURNER NORMAL POWER kW
Natural Gas
INJECTOR MARK 1/100 mm Btu/h
Auxiliary 1 70 3412
Semi-rapid 1.9 96 6483
Rapid 3 119 10236
Top Oven 1.7 95 5804
Main Oven 1.7 95 5804
GAS CONNECTION
Use a flexible pipe in compliance with the
regulation in force. Make sure they do not come in
touch with mobile parts and are not squeezed.
23
Loading ...
Loading ...
Loading ...