Loading ...
Loading ...
Loading ...
CAUTION
BEFORE AND AFTER RUNNING ON THE TREADMILL
Before Running:
1. Read the manual first to be familiar with the digital display and other important features.
2. Before starting the treadmill, always stand on the two side rails on both sides (not on the
running belt) as shown in the drawing.
3. Press in Safety Key underneath the display and have the safety clip securely attached
to an article of clothing.
4. Start the treadmill and allow it to reach a speed of at least 0.6 mph, grip handlebars before
beginning, then walk on the running belt to start your exercise program.
After Running:
1. If you hear any abnormal noises from the motor, please stop usingthistreadmill immediately
and contact your distributor for necessary maintenance.
2. Please refer to page 3-4 RUNNING DECK LUBRICATION to do necessary periodical
maintenance for long-term and functional operation.
3
FAIL TO PERFORM PERIODICAL MAINTENANCE MIGHT VOID THE WARRANTY.
RUNNING DECK LUBRICATION
Why lubricate?
If the lubricant dries out, the friction between the belt and the deck will rise and place undue
stress on the drive motor, drive belt and electronic motor control board. This could result in
catastrophic failure of these expensive components.
When to lubricate?
A high-efficient and low-friction running deck is used on this treadmill. The deck comes pre-
lubricated and subsequent lubrication should be done every 112 miles, or every 3 months of
operation, whichever comes first. Keeping the running deck lubricated at the recommended
period ensures the longest life possible for your treadmill.
Loading ...
Loading ...
Loading ...