Loading ...
Loading ...
Loading ...
27
E1 (Error 1):
When the machine starts and the computer does not detect signal from the sensor for
7 seconds, E1 will be shown on the computer.
E6 (Error 6):
When the machine starts and the computer could not read the VR signal from incline motor
for 6 seconds, E6 will be shown on the digital display.
If any above trouble happens, please consult the distributor.
E3 (Error 3):
E3 shows when the cable from computer and control box is not well-connected or damaged.
If the cable works well, check if the computer or control box is damaged.
NOTE:
If any odor is detected from motor, please apply some silicone on the running deck. ( Please refer
to page 3-4: TREADMILL RUNNING DECK LUBRICATION ) and see if the situation improves.
Then, consult the distributor for necessary help. If the odor persists, discontinue use and consult
your distributor.
WARNING
• DO NOT ALLOW CHILDREN TO USE THE MACHINE.
• TURN OFF THE MASTER POWER SWITCH AND UNPLUG THE POWER CABLE FROM
OUTLET WHEN NOT IN USE.
• FOR SAFETY REASON, ALWAYS KEEP THE CHILDREN AWAY FROM THE MACHINE.
• FOR SAFETY CONCERN, DO NOT OPERATE OTHER DEVICES WHEN YOU ARE
RUNNING, WALKING, OR CLIMBING AT HIGH SPEEDS.
Error Code & Trouble Shooting
Loading ...
Loading ...
Loading ...