Loading ...
Loading ...
Loading ...
27
25
24
BASIC SAW OPERATIONS
TURNING THE LASER GUIDE ON (FIG. 24)
Press the on/off rocker switch (1) to “ON” position to
activate the laser guide.
TURNING THE SAW ON (FIG. 24)
This miter saw is equipped with an ON/OFF trigger
switch (2). With the safety lock (3) pressed, squeeze
the trigger switch to turn the miter saw ON.
NOTE: Make the ON/OFF switch childproof. Insert
a padlock or chain with a padlock (not included)
through the hole (4) in the trigger switch, locking
the tool’s switch and preventing children and other
unauthorized users from turning the machine on.
When the trigger switch is released, the blade will be
stopped within 10 seconds.
● To avoid injury, after completing a cut and
releasing the trigger switch, wait and confirm the
blade has stopped before raising the cutting head.
● To avoid injury, check and tighten the arbor bolt
periodically.
SLIDING CARRIAGE SYSTEM (FIG. 25)
CAUTION: To reduce the risk of injury, return
carriage to the full rear position after each
crosscut operation.
●
For chop cutting operations on small workpieces,
slide the cutting head assembly completely toward
the rear of the unit and tighten the carriage lock
knob (1).
● To cut wide boards up to 8 in., the carriage lock
knob (1) must be loosened to allow the cutting
head to slide freely.
K
K
O
B
A
L
T
LASER
ON
OFF
WARNING
1
2
3
4
1
Loading ...
Loading ...
Loading ...