Loading ...
Loading ...
Loading ...
22
22
TOP VIEW
Cutting line
Blade
Laser beam
Cutting line
Workpiece
Laser beam
DANGER:
AVOID DIRECT EYE CONTACT
● A red laser line is radiated when the laser guide
switch is turned on. Avoid direct eye contact.
Always unplug the miter saw from power source
before making any adjustments.
● Laser Warning Label: Max. output < 5 mW,
wavelength: 630-660 nm, complies with 21CFR
1040.10 and 1040.11 Class IIIa laser product.
(Fig. 21)
● Laser Aperture Label:
AVOID EXPOSURE:
Laser radiation is emitted from this aperture.
(Fig. 21)
NOTE:
● All the adjustments for the operation of this laser
guide have been completed at the factory. Laser
guide is calibrated and set up to project to the
right of the blade (Fig. 22).
● Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
● The use of optical instruments with this product
will increase eye hazard.
● Do not attempt to repair or disassemble the
laser. If unqualified persons attempt to repair
this laser product, serious injury may result. Any
repair required on this laser product should be
performed by authorized service center personnel.
:
Puissance
Ce produit est conforme aux normes 21CFR 1040.10 et 1040.11
à
M
las normas
WARNING
WARNING
21
Laser warning
label
Laser aperture
label
Loading ...
Loading ...
Loading ...