Loading ...
Loading ...
Loading ...
MKF / MKFT (E5) 06/2020 page 129/176
NOTICE
Danger of overflow of the wastewater can.
Damage to the surroundings of the chamber.
Regularly check the filling level of the wastewater can.
Always empty the wastewater can in a timely manner before it is full.
Bringing a source of humidity into the inner chamber may increase wastewater production.
Regularly check the filling level of the wastewater can.
21.9.3 Connecting with wastewater recycling
When the chamber interior is clean, you can reuse the wastewater from the chamber. Connect the
wastewater connection “OUT” (14) of the chamber with the hose connection (24) of the freshwater can.
The wastewater can is not used in this case.
NOTICE
Danger of soiling of the vapor humidification system.
Damage to the chamber.
Make sure to reuse wastewater ONLY with a clean chamber interior.
In case of soiling / contamination of the interior, conduct the wastewater to the
wastewater connection or use the wastewater can.
BINDER GmbH is NOT responsible for the water quality at the user’s site, especially when
reusing wastewater.
Any problems and malfunctions that might arise following use of wastewater are excluded
from liability by BINDER GmbH.
Cable connection between the pump and the climatic chamber
Connect the cable plug from the cable connection (21) on the pump to the socket (18) at the rear of the
chamber as described in chap. 21.9.1.
Hose connection between the wastewater hose of the climatic chamber and the freshwater can
Plug the wastewater hose into the hose connection (24) of the freshwater can and secure it with a hose
clamp. You can use a part of the standard supplied water hose.
Plug the free hose edge to the wastewater connection “OUT” (14) at the rear of the chamber and secure it
with a hose clamp.
Hose connection (24)
of the freshwater can
Figure 27: Freshwater can
Loading ...
Loading ...
Loading ...