Loading ...
Loading ...
Loading ...
12
© 2017 DJI All Rights Reserved.
System Status Beep Codes
You can instantly tell the system’s status by observing the emitted
sounds from the motor.
Normal Description
Startup Tone System ready.
Abnormal Description
Rapid Beeping
Starting input signal is not at minimum.
Check the settings of your ight controller, receiver
and remote controller.
Slow Beeping No signal input.
Alternating Double
and Triple Beeps
Using the remote controller for conguration.
1. Power on the remote controller and receiver. Ensure a good communication
between them.
2. Push the throttle stick all the way up, connect the ESC to the motor
and power on the ESC. The motor will start beeping, alternating
between a double beep and a triple beep with a two-second gap
between each beep. To configure the ESC, carry out each of the
following movements within the two-second gap.
a. Throttle Range Calibration
After the double beep, pull the throttle stick all the way down. A
1-second beep will sound if calibration is complete.
b. Motor Rotation Direction Switch
After the triple beep, pull the throttle stick all the way down. A 1-second
beep will sound once motor rotation direction has been switched.
Loading ...
Loading ...
Loading ...