Loading ...
Loading ...
Loading ...
10
© 2017 DJI All Rights Reserved.
Using DJI Assistant 2
DJI Assistant 2 is used to upgrade and congure the ESC.
•
The DJI Takyon Updater is required but is not included with the
ESC. To use DJI Assistant 2, connect the ESC to a computer
through the DJI Takyon Updater as shown below.
•
To ensure your own safety, remove the propellers or disconnect
the ESC and motors before using DJI Assistant 2.
•
Unplug any other serial devices that are connected to your
computer before using the DJI Takyon Updater.
1. Download and install DJI Assistant 2 from the ofcial DJI website.
http://www.dji.com/takyon-z650/info#downloads
http://www.dji.com/takyon-z660/info#downloads
2. Connect the Takyon Updater to the ESC with the signal cable and
to your computer with a Micro USB cable. The signal cable’s white
wire transmits the control signal ( ); the red wire transmits the data
signal (+); the black wire is for ground (-). DO NOT reverse the
signal cable.
3. Connect a battery (3S - 6S LiPo) to supply power to the ESC. Do not
disconnect the ESC from your computer or the power supply until
conguration is complete.
4. Launch DJI Assistant 2. When a connection is established, the software
will display the connected devices.
Computer
ESC
Takyon Updater
Loading ...
Loading ...
Loading ...