Loading ...
Loading ...
Loading ...
© 2017 DJI All Rights Reserved.
11
If your ESC is not recognized by DJI Assistant 2 (no connected
devices):
•
Check if there is more than one FTDI device connected such
as another DJI Takyon Updater, a DJI Updater, an FTDI USB
adapter or development board (e.g. a BeagleBone, Raspberry or
Arduino board). Unplug the other FTDI devices, restart the ESC
and DJI Assistant 2, and try again.
•
Re-connect the ESC and the power supply in the following order:
Connect the ESC to your computer, connect the power supply to
the ESC, and then launch DJI Assistant 2.
5. Click the device name
ESC
under “Connected Devices” to enter the
settings page and congure the ESC. Click the Settings tab for basic
settings such as Active Braking, Timing, Motor Rotation, Startup Tone,
Throttle Range, etc. Click the Advanced Settings tab for Output PWM
Frequency Settings.
6. Click on the top left corner of “Connected Devices” to enter the
rmware upgrade page. Check the current rmware version and ensure
the installed rmware is up-to-date. If not, login with your DJI account and
click the Upgrade button.
Using the Remote Controller for ESC Conguration
Be sure to remove the propellers before conguring the ESC.
If your ESC is in the regular input throttle signal mode, calibrate the throttle
range and switch the motor rotation direction using the remote controller
.
Loading ...
Loading ...
Loading ...