1. Home
  2. Elica
  3. Elica ESL642S3 User Manual
  4. Page 17

Elica ESL642S3 Convertible Island Chimney Hood with 4Speed 6

User Manual - Page 17

For ESL642S3.

PDF File Manual, 62 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
17
Controls
Use the high suction speed in cases of concentrated kitchen
vapours. It is recommended that the cooker hood suction is
switched on for 5 minutes prior to cooking and to leave in
operation during cooking and for another 15 minutes
approximately after terminating cooking.
Note:Hoodretainslastspeedsettingwhenaspiration
switch is turned off.
Description of control panel
1. Light Button
PresslampbuttontoturnONthelightonHigh
Intensity(LampstatepreviouslyOFF).
PresslampbuttontoturnONthelightonLow
Intensity(LampstatepreviouslyON).
PresslampbuttontoturnOFFthelight(Lampstate
previouslyON).
2. Timer Button
Thedefaulttimersettingis10minutes,anditcanbe
adjusted between 60 minutes and 1 minute.
Afterpressingthetimerbutton,thecontrolenterstoa
timer setup mode, and user can adjust the timer
countdowntimewiththe“+”and“-”buttonswithin5
seconds.Thetimercanbeinitiatedimmediately
pressing the timer button, after setting the timer
duration or pressing the timer button twice (default 10
minutes setting).
If no action occurs within 5 seconds, the countdown
will start.
Duringthetimersetupthe“+”and“-”buttonsare
dedicated to the timer and no motor action will occur.
Oncethetimerisinitiated,itcanbecancelledby
pressing the timer button again.
3. Display
Shows the hood settings.
Thedisplaywillbelitatlowintensitywhenthehood
is not operating.
Pressing any key the display will light up at high
intensity.
Thedisplaywillbelitathighintensitywhenthehood
is operating.
If no key is pressed within a minute the display will
return to being lit at low intensity.
4. “-” Button. Speed Decrease / OFF
Thisbuttonisusedtodecreasethefanspeed,or
turnOFFthefan.
ThefanwillturnOFFifthe“-”buttonispressedand
thehoodwasintherstspeed.
Ifthefanisatsecondspeedandthe“-”buttonis
pressed,thefanwillbesettorstspeed.
Ifthefanisatthirdspeedandthe“-”keyispressed,
the fan will be set to second speed.
Ifthefanisatfourthspeedandthe“-”buttonis
pressed, the fan will be set to third speed.
IfthefanisOFFandthe“-”buttonispressed,the
control backlight will light up.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5. “+” Button. Speed Increase / ON
Thisbuttonisusedtoincreasethefanspeed,orturn
ONthefan.
ThefanwillturnONifthe“+”buttonispressedand
thehoodwasOFF.
Ifthefanisatrstspeedandthe“+”buttonis
pressed, the fan will be set to second speed.
Ifthefanisatsecondspeedandthe“+”buttonis
pressed, the fan will be set to third speed.
Ifthefanisatthirdspeedandthe“+”buttonis
pressed, the fan will be set to fourth speed.
Ifthefanisatfourthspeedandthe“+”buttonis
pressed, a beep will sound.
Clock programming
Theclockcanbereprogrammedatanytimeexcept
during an active timed function.
Theclockcanbedisplayedinatwelvehourformatand
valid clock times are from 1:00 to 12:59.
Theclockcanbereprogrammedpressingthe“Timer”
button for 3 seconds, and after, the clock can be
adjustedwiththe“+”and“-”buttons.
Theusercanhaveminuteincrements/decrementsof1
minute,butiftheuserkeeppressingthe“+”/”-”buttons
formorethan1second,theincrements/decrementswill
be of 5 minutes.
During this option the control will round to the nearest 5
minutes.
Theusercannishonreprogrammingtheclockpressing
the“Timer”button.
After1minuteofnobuttonpressedthecontrolwill
accept the programmed clock time and will add one
minute to the set clock.
•
•
•
•
•
•
•
•
•
•
•
•
Loading ...
Loading ...
Loading ...