Loading ...
Loading ...
Loading ...
14
Air deector installation
Assembletheairdeectorwiththeupperhorizontal
support with 2 assembly screws.
Measurefromthebottomoftheairdeectortothebottom
of the hood outlet, as shown.
•
•
•
Cuttheductatthemeasuredsize.
Sliptheductontothebottomofthedeector.
Place the duct over the exhaust outlet from the hood.
Useducttapetosealthedeectorandattheexhaust
outlet from the hood.
Electrical connection
WARNING
Electrical Shock Hazard
Warning: Turn off power circuit at the service panel
before wiring this unit.
120 VAC, 15 or 20 Amp circuit required.
ELECTRICAL GROUNDING INSTRUCTIONS
THISAPPLIANCEISFITTEDWITHANELECTRICAL
JUNCTIONBOXWITH3WIRES,ONEOFWHICH
(GREEN/YELLOW)SERVESTOGROUNDTHE
APPLIANCE.TOPROTECTYOUAGAINST
ELECTRICSHOCK,THEGREENANDYELLOWWIRE
MUSTBECONNECTEDTOTHEGROUNDINGWIRE
INYOURHOMEELECTRICALSYSTEM,ANDIT
MUSTUNDERNOCIRCUMSTANCESBECUTOR
REMOVED.
Failure to do so can result in death or electrical
shock.
Facing the front of the range hood, remove the left
knockout and the Junction box cover and install the
conduitconnector(cULuslisted)injunctionbox.
•
•
•
•
•
Loading ...
Loading ...
Loading ...