Loading ...
Loading ...
Loading ...
50 English
Troubleshooting
Troubleshooting
Checkpoints
If you encounter a problem with the washer, rst check the table below and try the
suggestions.
Problem Action
Does not turn on.
ŷ Make sure you use rated power for the product.
ŷ Make sure the power cord is completely plugged in.
ŷ Check the fuse or reset the circuit breaker.
Does not start.
ŷ Make sure the door is closed.
ŷ Make sure the water taps are open.
ŷ Make sure to press or tap Start/Pause to start the washing
machine.
ŷ Make sure Child Lock is not activated.
ŷ Before the washing machine starts to ll, it will make a series
of clicking noises to check the door lock and does a quick
drain.
ŷ Was the door opened during the spinning cycle? Close the
door, and press or tap Start/Pause to resume.
ŷ The machine enters Standby or is in a soaking cycle. Please
wait.
ŷ Check the fuse or reset the circuit breaker
Water is not supplied.
ŷ Make sure you press or tap Start/Pause after selecting the
water supply.
ŷ Make sure the water taps are open.
ŷ Is the lter net at the water supply hose connector clogged?
Clean the lter net by brushing with a toothbrush.
ŷ Is the water supply cut off? If the water supply is cut off, close
the tap and power off.
ŷ Straighten the water supply hoses.
ŷ Open and close the door, then press or tap Start/Pause.
ŷ If the water pressure is low, it takes longer to start washing.
ŷ If the water level is not as high as necessary or lower than
expected, use the level selector to adjust the water level.
After a cycle,
detergent remains
in the automatic
dispenser.
ŷ Make sure the washing machine is running with sufcient
water pressure.
ŷ Make sure the detergent drawer is properly inserted.
ŷ Remove and clean the detergent drawer, and then try again.
WA8700K_WA50K-03647A-03_EN.indd 50 2016/7/22 10:19:37
Loading ...
Loading ...
Loading ...