Loading ...
Loading ...
Loading ...
SB26
Connections
8
You may place the subwoofer in the positions as represented in the above figure.
• Placing it in a corner that is position (1) will maximize the amount of bass
in the room. However, corner placement can also increase the destructive
effect of the standing waves on bass performance. This effect can vary
depending on the listening position – some listening positions may yield
very good results while others may have too much (or too little) bass at
certain frequencies.
• Placing the subwoofer along the same plane as the soundbar that is
position (2) can produce the best integration between the sound of the
subwoofer and the soundbar. In some rooms, the best performance can be
resulted by placing the subwoofer behind the listening position (3).
You can experiment with subwoofer placement by temporarily placing the subwoofer
in the listening position and playing music with strong bass content. Move it to various
locations in the room while the system is playing until you determine where the
location of the best bass performance. Place the subwoofer in that location.
IMPORTANT: The maximum wireless operating distance between the
soundbar and subwoofer is approximately 15m (50 feet).
Connections
Audio/Video Connections
HDMI ARC TV Out: If your TV has an HDMI input, use the supplied HDMI cable to
connect it to the SB26’s HDMI ARC TV Out connection. The SB26 will pass video from
source devices connected to its HDMI Input connectors; along with its own on-screen
display information to the TV. If your TV is equipped with HDMI ARC Function, you can
feed its sound to the SB26 via the HDMI ARC TV Out connection, and it will not require
additional audio connections to the SB26. The HDMI ARC signal is active when the HDMI
TV source is selected.
The HDMI ARC function may require to be activated from your television menu to work.
You may refer to your TV owner’s manual to activate the HDMI ARC function.
If your television is not equipped with the HDMI ARC option, you will have to connect
an optical or analog cable from your television to the soundbar in addition to the HDMI
to get the audio.
NOTE: The SB26’s On-screen Information Display (OSD) only appears
through the HDMI TV Out connector. If you want to see the SB26’s OSD, you
need to connect its HDMI ARC TV Out connector to your TV even if you are
not connecting any HDMI video source devices to the SB26’s HDMI In 1/2
connectors.
HDMI-equipped TV
HDMI-equipped
source device
HDMI In 1/2: If any of your source devices have HDMI connectors, connect them to
the SB26’s HDMI In 1/2 connectors for the best possible video and audio performance
quality. Since the HDMI cable carries both digital video and digital audio signals, you do
not have to make any additional audio connections for the source devices you want to
connect via HDMI connectors.
Aux In and Optical In connections: If your TV and/or source devices do not have HDMI
connections, you can use the supplied audio cable and/or optical cable to connect your
TV and one source device to the SB26’s Aux In and/or Optical In connectors, respectively.
Aux input
Rear view
Optical input
Power Connections
After you have made and verified all of the source connections above:
1. Connect the DC power supply to the SB26’s power connection.
2. Plug the supplied AC cord into the DC power supply and into an active,
unswitched AC outlet.
AC power cord
Loading ...
Loading ...
Loading ...