Loading ...
Loading ...
Loading ...
OPERATIONS
2 1
DELAY END
Set the Delay funcon:
1.
Select a programme
2.
Press the DELAY END buon to choose the me(the delaying me is 1-24 H.)
3.Press
[
START/PAUSE
]
to commence the delay operaon
ON/OFF
Choose the Programme
Seng me Start
Cancel the Delay funcon:
Press the [DELAY END]buon,Use SLIDER to select CANCEL.It should be pressed
before starng the programme. If the programme already started, should press the
[ON/OFF]
buon to reset the programme.
RELOAD
This operaon can be executed during the washing process. When the drum is
sll rolling and there is large amount of water with high temperature in the drum.
The state is unsafe and the door cannot be opened forcefully. To press
[START/PAUSE] for 3 sec. to reload, and small amount of clothes can be added during
washing process. Please follow the steps as bellow:
1.Wait unl the drum stops rotaon.
2.
The door lock is unlocked.
3.
Open the door , add clothes to the drum, and close the door. Then press the
[START/PAUSE] buon.
Press
[
START
/
PAUSE
]
3sec.
Add clothes
START/PAUSE
MEMORY
Memorizes the frequently used program.
Select program and opons and Press [TEMP.] 3 sec,then the display will show
“Save success as Memory”.The default is COTTON.The program aer selecon will
cover the previous program.
Caution!
• Don't use the Reload funcon when the water level over the edge of the
inner tub or the temperature is higher.
DELAY
END
Caution!
• If there is any break in the power supply while the machine is operang,
a special memory stores the selected programme and when the power is
restarted, the machine will run the previous program automacally.
• While the machine is delaying, If there is any break in the power supply ,the
machine can’t start up operaon automacally. You should set it again.
Loading ...
Loading ...
Loading ...