Loading ...
Loading ...
Loading ...
INSTALLATION
13
3
Levelling the washing machine
1.
Check if the legs are closely aached to the cabinet. If not, please turn them to
their original posions ghten the nuts.
2.
Loosen the lock nut turn the feet unl it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.
Connecon between ordinary tap and inlet hose.
Loosen clamp nut and
four bolts
Press the tap end
ghtly to the rubber
ring inside the clamp,
and then, ghten the
4 bolts
Press slide bushing,
insert inlet hose into
connecng base
Connecon finished
2.
Connecon between screw tap and inlet hose.
Tap with threads and inlet hose
Special tap for washing machine
1
2
slide bushing
3
4
clamp nut
！
Warning!
• To prevent leakage or water damage, follow the instrucons in this chapter!
• Do not kink, crush, modify or sever water inlet hose.
！
Warning!
•
The lock nuts on all four feet must be screwed ghtly against the housing.
1
2
3
4
Raise
Lower
Lock nu
t
foot
slide bushing
Loading ...
Loading ...
Loading ...