Loading ...
Loading ...
Loading ...
Note
If you cannot connect to a network correctly, the following reasons are possible.
Try the connection again or use another connection method.
You pressed the WPS button more than two minutes after selecting [Start] in step 4.
The WPS button may have to be pressed and held for about two minutes (depending on
the router).
You cannot cancel the connection after the HDD AUDIO PLAYER has started
connecting to the network.
Do not turn the power off while the HDD AUDIO PLAYER is connecting to the
network.
Hint
For details on the name and position of the WPS button on your wireless LAN
router/access point, refer to the operating manual of the router/access point.
[32] Wi-Fi network connections (wireless LAN)
Method 2. Setting up a network connection by selecting an
access point
You can set up a Wi-Fi (wireless LAN) network connection by searching for an
access point.
Note
This connection method requires information such as the network name (SSID)
(*1) of the wireless LAN router/access point and the security key (password) (*2)
for the network.
*1
SSID (Service Set Identifier) is a name that identifies a particular access point.
*2
This information should be available from a label on your wireless LAN router/access point,
from the operating manual, from the person who set up your wireless network, or from the
information provided by your Internet service provider.
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
Loading ...
Loading ...
Loading ...