Loading ...
Loading ...
Loading ...
Press MUTING on the remote control to cancel the muting function.
Check that headphones are not connected. If headphones are connected, sound
is not output from the speakers.
Check that the correct input jack(s) are being used.
Check that the cord(s) are connected to the correct input jack(s) on the selected
equipment.
Check that both the HDD AUDIO PLAYER and the connected equipment are
turned on.
Sound may be interrupted when the sampling frequency or audio format is
changed.
Only 2ch tracks are supported in any of the playable file formats. Tracks other
than 2ch tracks cannot be played.
DRM (Digital Rights Management)-protected music files cannot be played.
Confirm the audio file formats that can be played.
If the HDD AUDIO PLAYER is being used with a television, speakers, video deck
or tape deck and is placed too close to that equipment, noise may result.
Audio formats other than LPCM 2ch cannot be played through the OPTICAL IN or
COAXIAL IN jacks.
The HDD AUDIO PLAYER does not output a signal through the D/A
DIRECT・LINE OUT jacks when [LINE IN 1] or [LINE IN 2] is selected in the
[External Input] menu.
If you are using an external hard disk drive, skipping may occur in the playback
sound depending on the hard disk performance.
The HDD AUDIO PLAYER receives transferred files and analyzes music files at
the same time. Start playback after the icon disappears from the display.
When no sound is output from one side or both sides of the headphones, fully
insert the plug of the headphones.
There is severe humming or noise.
Check whether the cords or cables are broken or have any other defects.
Check that the speakers are connected to the HDD AUDIO PLAYER correctly.
Check that the connecting cords are not near a transformer, motor, TV set or
fluorescent light.
Move your TV away from the HDD AUDIO PLAYER and other audio equipment.
Loading ...
Loading ...
Loading ...