Loading ...
Loading ...
Loading ...
(The network speed may differ depending on the network environment.)
LAN cable:
We recommend using a LAN cable that is Cat5 or higher. A normal-type cable is
also recommended, as some flat-type LAN cables are easily affected by noise.
If the receiver is used in an environment with power supply noise from electronic
devices or in a noisy network environment, use a shielded-type LAN cable.
Wi-Fi (using a wireless LAN network)
Compatible standards:
IEEE 802.11 b/g/n
Security mode:
None
WEP
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
Note
Wi-Fi devices work on the 2.4 GHz band, which is used by a variety of devices.
Wi-Fi devices use technology to minimize radio interference from other devices
that use the same band. However, radio interference may still cause slower data
transfer rates, reduce the communication range, or cause communication failure.
The data transfer rate and communication range may vary depending on the
following conditions:
Distance between devices
Presence of obstacles between devices
Device configuration
Signal conditions
Surrounding environment (wall material, etc.)
Software in use
Communications may be cut off depending on signal conditions.
The HDD AUDIO PLAYER does not support 5 GHz band Wi-Fi.
The data transfer rate for IEEE 802.11g and IEEE 802.11n (2.4 GHz) devices may
be affected by interference when used with IEEE 802.11b products. Also, products
using IEEE 802.11g and IEEE 802.11n automatically lower the transfer rate to
maintain compatibility with IEEE 802.11b products. The normal transfer rate may
Loading ...
Loading ...
Loading ...