Loading ...
Loading ...
Loading ...
Selectable menu items are described below.
On:
The HDD AUDIO PLAYER is connected to the network at all times, even when the
unit is turned off. This allows you to start up or operate the HDD AUDIO PLAYER
from the HAP Music Transfer or HDD Audio Remote application. This mode also
reduces the startup time of the HDD AUDIO PLAYER.
Off:
The power consumption is lower than when Network Standby mode is set to [On], but
the startup time when the HDD AUDIO PLAYER is turned on is longer (factory
default setting).
Disconnected Wired Connection Detection and Wake on LAN settings
Setting Network Standby mode to [On] allows you to specify the following setting
options.
Disconnected Wired Connection Detection:
When [Disconnected Wired Connection Detection] is set to [On] (*), the HDD AUDIO
PLAYER will shift into normal standby mode from Network Standby mode in about 20
minutes if the LAN cable comes off from the HDD AUDIO PLAYER connected to a
wired LAN. This will help minimizing power consumption while the HDD AUDIO
PLAYER is in standby mode.
To activate [Disconnected Wired Connection Detection], make sure that [Network
Standby] is set to [On], select [Settings] - [System Settings] - [Disconnected Wired
Connection Detection] from the Home screen, and then select [On].
*
The factory default setting for [Disconnected Wired Connection Detection] is [On] on models
for Europe; and [Off] on models for other areas.
Wake on LAN:
While [Wake on LAN] is set to [On], you can use your computer to turn on the HDD
AUDIO PLAYER in Network Standby mode.
To activate [Wake on LAN], make sure that [Network Standby] is set to [On], select
[Settings] - [System Settings] - [Wake on LAN] from the Home screen, and then
select [On].
Loading ...
Loading ...
Loading ...